The use of nanomodified heat storage materials for thermal stabilization in the engineering and aerospace industry as a solution for economy

The paper presents studies on the use of nanomodified materials with phase transitions. The rmostable heat exchange devices based on materials modified with carbon nanotubes allowing to control thermal contact have been developed. It is established that through a controlled thermal contact it is possible to provide a heat flux of up to 100 [kW·m-2]. The application of heat-resistance storage material in technical devices such as self-rescuers is justified. The efficiency of thermal control is established, since the temperature after the heat exchanger is reduced to 40 ° C at an incoming temperature of about 100 °C. © The Authors, published by EDP Sciences, 2018.

Авторы
Shchegolkov A.1 , Shchegolkov A.1 , Demidova A. 2
Сборник материалов конференции
Издательство
EDP Sciences
Язык
Английский
Статус
Опубликовано
Номер
03012
Том
224
Год
2018
Организации
  • 1 Tambov State Technical University, Tambov, 392000, Russian Federation
  • 2 Peoples Friendship University of Russia, Moscow, 117198, Russian Federation
Ключевые слова
Aerospace industry; Energy efficiency; Heat exchangers; Heat flux; Heat resistance; Heat storage; Manufacture; Yarn; Heat exchange; Nanomodified; Thermal contact; Thermal control; Thermal stabilization; Thermal Engineering
Дата создания
04.02.2019
Дата изменения
04.02.2019
Постоянная ссылка
https://repository.rudn.ru/ru/records/article/record/36274/