Self-Programming of the Tool Trajectory in CNC Lathes

Abstract: Methods of self-programming of the tool trajectory in CNC lathes are considered for the example of turning. By adaptive control, the longitudinal supply is regulated in accordance with the load that acts in cutting. © 2019, Allerton Press, Inc.

Authors
Timiryazev V.A. 1 , Khostikoev M.Z.2 , Konoplev V.N. 3 , Vetyugov A.V. 3
Journal
Russian Engineering Research
Number of issue
2
Language
English
Pages
154-157
Status
Published
Link
External link
DOI
10.3103/S1068798X19020114
Volume
39
Year
2019
Organizations
  • 1 Stankin Moscow State Technical University, Moscow, Russian Federation
  • 2 Gubkin Russian State University of Petroleum and Gas, Moscow, Russian Federation
  • 3 Russian University of People’s Friendship, Moscow, Russian Federation
Keywords
adaptive control; control software; margin; passes; programming; self-programming; standard cycles; tool supply; tool trajectory; turning
Date of creation
19.07.2019
Date of change
19.07.2019
Short link
https://repository.rudn.ru/en/records/article/record/38765/
Share

Other records