Effect of the Structural State Formed during Laser Melting Deposition on the Parameters of a Nitrided Layer on 25Kh13N2 Martensitic Steel

Abstract: The effect of the structural state formed during laser melting deposition (LMD) on the nitriding of 25Kh13N2 martensitic steel in a glow discharge is investigated. The nitriding of the steel synthesized by LMD is shown to result in a diffusion layer which is twice as thick as that in the steel after martempering. The diffusion layer of the steel synthesized by LMD followed by high-temperature tempering is 1.75 times thicker than that of the steel after martempering. The microhardness distribution across the diffusion layer is flattened in the case of LMD or LMD followed by high-temperature tempering. © 2020, Pleiades Publishing, Ltd.

Авторы
Tsvetkova E.V.1 , Bazaleeva K.O. 2 , Smirnov A.E. 1 , Chekin I.S.1 , Zhidkov A.S.1
Издательство
Maik Nauka-Interperiodica Publishing
Номер выпуска
7
Язык
Английский
Страницы
792-798
Статус
Опубликовано
Том
2020
Год
2020
Организации
  • 1 Bauman Moscow State Technical University, Moscow, 105005, Russian Federation
  • 2 RUDN University, Moscow, 117198, Russian Federation
Ключевые слова
laser melting deposition; microhardness distribution; nitrided layer thickness; steel nitriding
Дата создания
02.11.2020
Дата изменения
02.11.2020
Постоянная ссылка
https://repository.rudn.ru/ru/records/article/record/64564/