Self-Programming of the Tool Trajectory in CNC Lathes

Abstract: Methods of self-programming of the tool trajectory in CNC lathes are considered for the example of turning. By adaptive control, the longitudinal supply is regulated in accordance with the load that acts in cutting. © 2019, Allerton Press, Inc.

Авторы
Timiryazev V.A. 1 , Khostikoev M.Z.2 , Konoplev V.N. 3 , Vetyugov A.V. 3
Журнал
Russian Engineering Research
Номер выпуска
2
Язык
Английский
Страницы
154-157
Статус
Опубликовано
Ссылка
Внешняя ссылка
DOI
10.3103/S1068798X19020114
Том
39
Год
2019
Организации
  • 1 Stankin Moscow State Technical University, Moscow, Russian Federation
  • 2 Gubkin Russian State University of Petroleum and Gas, Moscow, Russian Federation
  • 3 Russian University of People’s Friendship, Moscow, Russian Federation
Ключевые слова
adaptive control; control software; margin; passes; programming; self-programming; standard cycles; tool supply; tool trajectory; turning
Дата создания
19.07.2019
Дата изменения
19.07.2019
Постоянная ссылка
https://repository.rudn.ru/ru/records/article/record/38765/
Поделиться

Другие записи