В настоящее время актуальной является разработка технологий воздействия на нефтяные пласты, которые будут применимы как на традиционных промыслах - с целью увеличения нефтеотдачи, так и на месторождениях трудноизвлекаемых запасов. Перспективным является метод водогазового воздействия с применением насосно-эжекторных систем. В данной статье рассмотрен способ реализации ВГВ, в котором в качестве газовой компоненты водогазовой смеси является попутный нефтяной газ, скапливающийся в затрубных пространствах добывающих скважин в процессе их эксплуатации. Рассчитаны параметры насосно-эжекторной системы для условий одного из месторождений Урало-Поволжья. Предложенное решение позволит снизить затрубные давления, что способствует увеличению дебитов скважин, а закачка попутного газа и воды в виде мелкодисперсной водогазовой смеси позволяет увеличить охват зоны воздействия на пласт, что обусловливает увеличение нефтеотдачи и полезное использование ПНГ.
Currently, it is relevant to develop technologies for influencing oil reservoirs, which will be applicable both in traditional fields- in order to increase oil recovery, and in deposits of hard-to-recover reserves. The method of SWAG technology using pump-ejector systems is promising. This article discusses a method for implementing SWAG injection in the reservoir, in which the gas component of the water-gas mixture is associated petroleum gas that accumulates in the annulus of production wells during their operation. The parameters of the pump-ejector system are calculated for the conditions of one of the fields in the Ural-Volga region. The proposed solution will reduce the annular pressure, which contributes to an increase in well flow rates, and the injection of associated gas and water in the form of a finely dispersed water-gas mixture allows to increase the coverage of the zone of influence on the formation, which leads to an increase in oil recovery and beneficial use of APG.