Ghorbani S. - list of publications

SIMULTANEOUS EFFECTS OF CUTTING DEPTH AND TOOL OVERHANG ON THE VIBRATION BEHAVIOR OF CUTTING TOOL AND HIGH-CYCLE FATIGUE BEHAVIOR OF PRODUCT: EXPERIMENTAL RESEARCH ON THE TURNING MACHINE

Article

Allenov D.G., Deinova K.D., Ghorbani Siamak, Reza Kashyzadeh Kazem

International Journal of Advanced Manufacturing Technology. Springer London. 2022.

PREDICTION OF CONCRETE COMPRESSIVE STRENGTH USING A BACK-PROPAGATION NEURAL NETWORK OPTIMIZED BY A GENETIC ALGORITHM AND RESPONSE SURFACE ANALYSIS CONSIDERING THE APPEARANCE OF AGGREGATES AND CURING CONDITIONS

Article

Reza Kashyzadeh Kazem, Amiri Nima, Ghorbani Siamak, Souri Kambiz

Buildings. MDPI Multidisciplinary Digital Publishing Institute. Vol. 12. 2022. 438 p.

A COMPREHENSIVE REVIEW ON MECHANICAL FAILURES CAUSE VIBRATION IN THE GAS TURBINE OF COMBINED CYCLE POWER PLANTS

Article

Watban Khalid Fahmi Al-Tekreeti, Reza Kashyzadeh Kazem, Ghorbani Siamak

Engineering Failure Analysis. PERGAMON-ELSEVIER SCIENCE LTD. Vol. 134. 2022. 106094 p.

AN EXPERIMENTAL ANALYSIS TO DETERMINE THE LOAD-BEARING CAPACITY OF 3D PRINTED METALS

Article

Kogo Bridget, Xu Chao, Wang Bin, Chizari Mahmoud, Reza Kashyzadeh Kazem, Ghorbani Siamak

Materials. MDPI AG. Vol. 12. 2022. 4333 p.

NUMERICAL STUDY OF FREE VIBRATION BEHAVIOUR OF FILLED TOOL HOLDER USING EPOXY-GRANITE

Article

Kashyzadeh K.R., Ghorbani S.

Journal of Physics: Conference Series. Institute of Physics Publishing. Vol. 1687. 2020.

EFFECTS OF DRYING TEMPERATURE AND AGGREGATE SHAPE ON THE CONCRETE COMPRESSIVE STRENGTH: EXPERIMENTS AND DATA MINING TECHNIQUES

Article

Ghorbani S., Forouzanmehr M., Reza Kashyzadeh K.

International Journal of Engineering Transactions C: Aspects. Materials and Energy Research Center. Vol. 33. 2020. P. 1780-1791

TAGUCHI APPROACH AND RESPONSE SURFACE ANALYSIS FOR DESIGN OF A HIGH-PERFORMANCE SINGLE-WALLED CARBON NANOTUBE BUNDLE INTERCONNECTS IN A FULL ADDER

Article

Ghorbani S., Ghorbani S., Kashyzadeh K.R.

INTERNATIONAL JOURNAL OF ENGINEERING. MATERIALS & ENERGY RESEARCH CENTER-MERC. Vol. 33. 2020. P. 1598-1607

WEAR ANALYSIS OF BEARINGS BY DIRECT SPECTRUM METHOD WHEN TRANSMITTING TORQUE MOTION FROM ELECTRIC MOTOR

Article

Allenov D.G., Pinaev R.A., Kravchenya V.I., Siamak G.

Научно-технический вестник Поволжья. Общество с ограниченной ответственностью "Научно-технический вестник Поволжья". 2019. P. 92-95

THE EFFECT OF COMPOSITE BORING BARS ON VIBRATION IN MACHINING PROCESS

Article

Ghorbani S., Rogov V.A., Carluccio A., Belov P.S.

International Journal of Advanced Manufacturing Technology. Springer London. Vol. 105. 2019. P. 1157-1174

EXPERIMENTAL AND ANALYTICAL RESEARCH ON RELATIONSHIP BETWEEN TOOL LIFE AND VIBRATION IN CUTTING PROCESS

Article

Ghorbani S., Kopilov V.V., Polushin N.I., Rogov V.A.

Archives of Civil and Mechanical Engineering. Elsevier B.V.. Vol. 18. 2018. P. 844-862

EXPERIMENTAL AND THEORETICAL RESEARCH ON DRILLING EPOXY GRANITE USING COATED AND UNCOATED CARBIDE SPIRAL DRILL BITS

Article

Ghorbani S., Crisostomo A.V.A., Rogov V.A., Polushin N.I.

International Journal of Mechanical Sciences. Elsevier Ltd. Vol. 135. 2018. P. 240-252

IMPROVEMENT OF CUTTING TOOL PERFORMANCE DURING MACHINING PROCESS BY USING DIFFERENT SHIM

Article

Rogov V.A., Ghorbani S., Popikov A.N., Polushin N.I.

Archives of Civil and Mechanical Engineering. Elsevier B.V.. Vol. 17. 2017. P. 694-710

ПРИМЕНЕНИЕ МЕТОДА ТАГУТИ ДЛЯ ОПТИМИЗАЦИИ ВИБРАЦИИ И ШЕРОХОВАТОСТИ ОБРАБАТЫВАЕМОЙ ПОВЕРХНОСТИ ПРИ МЕХАНИЧЕСКОЙ ОБРАБОТКЕ

Article

Рогов В.А., Сиамак Горбани

Технология машиностроения. 2016. P. 11-21

INFLUENCE OF THE HANDLE DESIGN ON A COMPOSITE LATHE CUTTER

Article

Rogov V.A., Gorbani S.

Russian Engineering Research. Vol. 35. 2015. P. 57-60

ПОВЫШЕНИЕ КАЧЕСТВА ПОВЕРХНОСТИ ОБРАБАТЫВАЕМЫХ ДЕТАЛЕЙ ПРИ ТОЧЕНИИ РЕЗЦАМИ ЗА СЧЁТ УЛУЧШЕНИЯ ДЕМПФИРУЮЩИХ СВОЙСТВ ДЕРЖАВОК, ЗАПОЛНЕННЫХ КОМПОЗИЦИОННЫМ МАТЕРИАЛОМ

Dissertation

Горбани Сиамак

2015. 214 p.

RESEARCH ON SELECTING THE OPTIMAL DESIGN OF ANTIVIBRATIONAL LATHE TOOL USING COMPUTER SIMULATION

Article

Rogov V.A., Ghorbani S.

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. SAGE Publications Ltd. Vol. 229. 2015. P. 162-167

VIBRATIONAL INVESTIGATION ON TOOLHOLDERS OF CUTTING TOOLS IN FINISH TURNING

Article

Рогов В.А., Горбани С.

RUDN Journal of Engineering Researches. Федеральное государственное автономное образовательное учреждение высшего образования Российский университет дружбы народов (РУДН). 2014. P. 16-22

ВЛИЯНИЕ КОНСТРУКЦИИ ДЕРЖАВКИ СБОРНОГО ТОКАРНОГО РЕЗЦА НА ЕГО ДЕМПФИРУЮЩУЮ СПОСОБНОСТЬ

Article

Рогов В.А., Горбани С.

СТИН. 2014. P. 14-18

ВЫБОР РАЦИОНАЛЬНОЙ КОНСТРУКЦИИ ДЕРЖАВКИ СБОРНОГО ТОКАРНОГО РЕЗЦА СО ВСТАВКАМИ ИЗ КОМПОЗИЦИОННОГО МАТЕРИАЛА КОМПЬЮТЕРНЫМ МОДЕЛИРОВАНИЕМ

Article

Рогов В.А., Горбани С.

Вестник машиностроения. 2014. P. 81-82

INVESTIGATION OF THE MACHINING PARAMETERS FOR THE FINISH TURNING

Article

Rogov V.A., Ghorbani S.

Фундаментальные исследования. 2013. P. 435-440

INVESTIGATION OF DAMPING CAPACITY OF THE COMBINED LATHE TOOL USING COMPOSITE MATERIAL IN ITS STRUCTURE

Article

Rogov V.A., Ghorbani S.

Фундаментальные исследования. 2013. P. 1094-1099

Горбани Сиамак

List of records

SIMULTANEOUS EFFECTS OF CUTTING DEPTH AND TOOL OVERHANG ON THE VIBRATION BEHAVIOR OF CUTTING TOOL AND HIGH-CYCLE FATIGUE BEHAVIOR OF PRODUCT: EXPERIMENTAL RESEARCH ON THE TURNING MACHINE

PREDICTION OF CONCRETE COMPRESSIVE STRENGTH USING A BACK-PROPAGATION NEURAL NETWORK OPTIMIZED BY A GENETIC ALGORITHM AND RESPONSE SURFACE ANALYSIS CONSIDERING THE APPEARANCE OF AGGREGATES AND CURING CONDITIONS

A COMPREHENSIVE REVIEW ON MECHANICAL FAILURES CAUSE VIBRATION IN THE GAS TURBINE OF COMBINED CYCLE POWER PLANTS

AN EXPERIMENTAL ANALYSIS TO DETERMINE THE LOAD-BEARING CAPACITY OF 3D PRINTED METALS

NUMERICAL STUDY OF FREE VIBRATION BEHAVIOUR OF FILLED TOOL HOLDER USING EPOXY-GRANITE

EFFECTS OF DRYING TEMPERATURE AND AGGREGATE SHAPE ON THE CONCRETE COMPRESSIVE STRENGTH: EXPERIMENTS AND DATA MINING TECHNIQUES

TAGUCHI APPROACH AND RESPONSE SURFACE ANALYSIS FOR DESIGN OF A HIGH-PERFORMANCE SINGLE-WALLED CARBON NANOTUBE BUNDLE INTERCONNECTS IN A FULL ADDER

WEAR ANALYSIS OF BEARINGS BY DIRECT SPECTRUM METHOD WHEN TRANSMITTING TORQUE MOTION FROM ELECTRIC MOTOR

THE EFFECT OF COMPOSITE BORING BARS ON VIBRATION IN MACHINING PROCESS

EXPERIMENTAL AND ANALYTICAL RESEARCH ON RELATIONSHIP BETWEEN TOOL LIFE AND VIBRATION IN CUTTING PROCESS

EXPERIMENTAL AND THEORETICAL RESEARCH ON DRILLING EPOXY GRANITE USING COATED AND UNCOATED CARBIDE SPIRAL DRILL BITS

IMPROVEMENT OF CUTTING TOOL PERFORMANCE DURING MACHINING PROCESS BY USING DIFFERENT SHIM

ПРИМЕНЕНИЕ МЕТОДА ТАГУТИ ДЛЯ ОПТИМИЗАЦИИ ВИБРАЦИИ И ШЕРОХОВАТОСТИ ОБРАБАТЫВАЕМОЙ ПОВЕРХНОСТИ ПРИ МЕХАНИЧЕСКОЙ ОБРАБОТКЕ

INFLUENCE OF THE HANDLE DESIGN ON A COMPOSITE LATHE CUTTER

RESEARCH ON SELECTING THE OPTIMAL DESIGN OF ANTIVIBRATIONAL LATHE TOOL USING COMPUTER SIMULATION

VIBRATIONAL INVESTIGATION ON TOOLHOLDERS OF CUTTING TOOLS IN FINISH TURNING

ВЛИЯНИЕ КОНСТРУКЦИИ ДЕРЖАВКИ СБОРНОГО ТОКАРНОГО РЕЗЦА НА ЕГО ДЕМПФИРУЮЩУЮ СПОСОБНОСТЬ

ВЫБОР РАЦИОНАЛЬНОЙ КОНСТРУКЦИИ ДЕРЖАВКИ СБОРНОГО ТОКАРНОГО РЕЗЦА СО ВСТАВКАМИ ИЗ КОМПОЗИЦИОННОГО МАТЕРИАЛА КОМПЬЮТЕРНЫМ МОДЕЛИРОВАНИЕМ

INVESTIGATION OF THE MACHINING PARAMETERS FOR THE FINISH TURNING

INVESTIGATION OF DAMPING CAPACITY OF THE COMBINED LATHE TOOL USING COMPOSITE MATERIAL IN ITS STRUCTURE

Other authors

Konovalov M.

Yusupov A.A.