Ghorbani S.

EXPERIMENTAL STUDY OF THE EROSION BEHAVIOR OF 304 STAINLESS STEEL UNDER SOLID-LIQUID JET FLOW IMPINGING AT DIFFERENT IMPACT ANGLES

Article

Ridha Waleed Khalid Mohammed, Reza Kashyzadeh Kazem, Ghorbani Siamak

AIP Conference Proceedings. Том 3211. 2025.

DEPENDENCE OF THE EROSION RATE OF AISI 304 AND AISI 316 VIA THE SIZE OF SEDIMENT PARTICLES

Article

Ridha Waleed Khalid Mohammed, Reza Kashyzadeh Kazem, Ghorbani Siamak

IET Conference Proceedings. Том 2024. 2025. С. 82-86

COMMON CAUSES OF FAILURES IN THE INDUSTRIAL BOLT AND NUT CONNECTIONS☆

Article

Kashyzadeh K.R., Ghorbani S., Kasimovich A.M.

Engineering Failure Analysis. Том 173. 2025.

DEPENDENCE OF THE EROSION RATE OF AISI 304 AND AISI 316 VIA THE SIZE OF SEDIMENT PARTICLES

Article

Ridha Waleed Khalid Mohammed, Reza Kashyzadeh Kazem, Ghorbani Siamak

IET Conference Proceedings. Том 2024. 2025. С. 82-86

INFLUENCE OF ENVIRONMENTAL TEMPERATURE ON THE CORROSION RESISTANCE OF VARIOUS ALUMINUM ALLOYS: AN EXPERIMENTAL STUDY

Article

Reza Kashyzadeh Kazem, Ghorbani Siamak, Averyanov Andrey Strgeevich

RUDN Journal of Engineering Researches. Том 26. 2025. С. 94-106

EXPERIMENTAL STUDY OF THE EROSION BEHAVIOR OF 304 STAINLESS STEEL UNDER SOLID-LIQUID JET FLOW IMPINGING AT DIFFERENT IMPACT ANGLES

Article

Ridha Waleed Khalid Mohammed, Reza Kashyzadeh Kazem, Ghorbani Siamak

AIP Conference Proceedings. Том 3211. 2025.

COMMON CAUSES OF FAILURES IN THE INDUSTRIAL BOLT AND NUT CONNECTIONS

Article

Kashyzadeh Kazem Reza, Ghorbani Siamak, Al-Adarbi Marsel Kasimovich

Engineering Failure Analysis. 2025. 109431 с.

EXPERIMENTAL STUDY OF THE EROSION BEHAVIOR OF 304 STAINLESS STEEL UNDER SOLID-LIQUID JET FLOW IMPINGING AT DIFFERENT IMPACT ANGLES

Article

Ridha Waleed Khalid Mohammed, Reza Kashyzadeh Kazem, Ghorbani Siamak

AIP Conference Proceedings. Том 3211. 2025.

THE INFLUENCE OF NANOCOATINGS ON THE WEAR, CORROSION, AND EROSION PROPERTIES OF AISI 304 AND AISI 316L STAINLESS STEELS: A CRITICAL REVIEW REGARDING HYDRO TURBINES

Article

Reza Kashyzadeh Kazem, Ridha Waleed Khalid Mohammed, Ghorbani Siamak

Corrosion and Materials Degradation. Том 6. 2025. 6 с.

DEPENDENCE OF THE EROSION RATE OF AISI 304 AND AISI 316 VIA THE SIZE OF SEDIMENT PARTICLES

Article

Ridha Waleed Khalid Mohammed, Reza Kashyzadeh Kazem, Ghorbani Siamak

IET Conference Proceedings. Том 2024. 2025. С. 82-86

INFLUENCE OF SEDIMENT PARTICLE SIZE ON EROSION RATE OF AISI 304 STAINLESS STEEL

Article

Mohammad Ridha Waleed Khalid, Reza Kashyzadeh Kazem, Ghorbani Siamak

Lecture Notes in Networks and Systems. 2024. С. 317-328

FAULT DETECTION IN THE GAS TURBINE OF THE KIRKUK POWER PLANT: AN ANOMALY DETECTION APPROACH USING DLSTM-AUTOENCODER

Article

Watban Khalid Fahmi Al-Tekreeti, Reza Kashyzadeh Kazem, Ghorbani Siamak

Engineering Failure Analysis. 2024. 108213 с.

TENSILE PROPERTIES ESTIMATION OF 3D PRINTED POLYLACTIC ACID SAMPLES VIA PROCESS PARAMETERS USING DATA-DRIVEN METHODS

Article

Abdesselem Said, Siamak Ghorbani, Kazem Reza Kashyzadeh

Inforino 2024. VII International Conference on Information Technologies in Engineering Education. Moscow, 16-19.04.2024. 2024.

ENHANCED AUTOREGRESSIVE INTEGRATED MOVING AVERAGE MODEL FOR ANOMALY DETECTION IN POWER PLANT OPERATIONS

Article

Khalid Fahmi A.T.W., Reza Kashyzadeh Kazem, Ghorbani Siamak

International Journal of Engineering, Transactions B: Applications. Том 37. 2024. С. 1691-1699

FAILURE ANALYSIS OF A KAPLAN TURBINE BLADE IN IRAQ’S HADITHA HYDROPOWER PLANT

Article

Mohammed Ridha Waleed Khalid, Reza Kashyzadeh Kazem, Ghorbani Siamak

RUDN Journal of Engineering Researches. Том 1. 2024. С. 30-37

ADVANCEMENTS IN GAS TURBINE FAULT DETECTION: A MACHINE LEARNING APPROACH BASED ON THE TEMPORAL CONVOLUTIONAL NETWORK–AUTOENCODER MODEL

Article

Al-Tekreeti Khalid Fahmi Watban, Reza Kashyzadeh Kazem, Ghorbani Siamak

Applied Sciences (Switzerland). Том 11. 2024. 4551 с.

ADVANCEMENTS IN GAS TURBINE FAULT DETECTION: A MACHINE LEARNING APPROACH BASED ON THE TEMPORAL CONVOLUTIONAL NETWORK-AUTOENCODER MODEL

Article

Fahmi A.WK., Kashyzadeh K.R., Ghorbani S.

APPLIED SCIENCES-BASEL. Том 14. 2024.

SMART MAINTENANCE STRATEGIES IN COMBINED CYCLE POWER PLANT

Article

Fahmi A.-T.W.K., Reza Kashyzadeh K., Ghorbani S.

Journal of Computational and Applied Research in Mechanical Engineering. Том 14. 2024. С. 35-46

TECHNICAL SOLUTION TO DECREASE CAVITATION EFFECTS IN THE KAPLAN TURBINE BLADE

Article

Khalid M.R., Reza Kashyzadeh Kazem, Ghorbani Siamak

RUDN Journal of Engineering Researches. Том 25. 2024. С. 121-129

INDUSTRIAL VIBRATION DETECTION TECHNIQUES FOR ENHANCED MONITORING AND MAINTENANCE OF COMBINED CYCLE POWER PLANTS

Article

Al-Tekreeti W.K., Reza K.K., Ghorbani Siamak

ENGINEERING SYSTEMS - 2023. 2023. С. 167-178

EFFECTIVE PARAMETERS OF SHOT PEENING TREATMENT ON IMPROVING THE DURABILITY OF INDUSTRIAL PRODUCTS MADE OF METALLIC MATERIALS

Article

Polunin V.V., Ghorbani Siamak, Reza K.K.

ENGINEERING SYSTEMS - 2023. 2023. С. 155-166

COMPARISON OF SOME SELECTED TIME-DOMAIN FATIGUE FAILURE CRITERIA DEDICATED FOR MULTI INPUT RANDOM NON-PROPORTIONAL LOADING CONDITIONS IN INDUSTRIAL COMPONENTS

Article

Reza Kashyzadeh K., Ghorbani S.

Engineering Failure Analysis. Том 143. 2023. 106907 с.

COMMON FAILURES IN HYDRAULIC KAPLAN TURBINE BLADES AND PRACTICAL SOLUTIONS

Article

Khalid Mohammed Ridha Waleed, Reza Kashyzadeh Kazem, Ghorbani Siamak

Materials. Том 16. 2023. 3303 с.

QUALITY ANALYSIS OF NATURAL GAS USING THE STRUCTURAL RELIABILITY OF AN ANALYTICAL INFORMATION SYSTEM

Article

Farhadov Mais, Vaskovskii Sergei, Brokarev Ivan, Ghorbani Siamak, Reza Kashyzadeh Kazem

Mathematics. Том 11. 2023. 3238 с.

INDUSTRIAL TECHNIQUES OF CORROSION PREVENTION IN ALUMINUM ALLOYS

Article

Averyanov A.S., Ghorbani Siamak, Reza K.K.

ENGINEERING SYSTEMS - 2023. 2023. С. 144-154

APPLICATION OF EXPERIMENTAL DATA BASED ON TAGUCHI APPROACH TO OPTIMIZE MACHINING PARAMETERS OF AL6061T6 TO REDUCE CUTTING FORCES AND MOMENTS

Article

Reza Kashyzadeh K., Ghorbani S., Malkova M.Yu.

RUDN Journal of Engineering Researches. Том 24. 2023. С. 279-287

NEW NEURAL NETWORK-BASED ALGORITHM FOR PREDICTING FATIGUE LIFE OF ALUMINUM ALLOYS IN TERMS OF MACHINING PARAMETERS

Article

Reza Kashyzadeh K., Ghorbani S.

Engineering Failure Analysis. Том 146. 2023. 107128 с.

PREDICTION OF CONCRETE COMPRESSIVE STRENGTH USING A BACK-PROPAGATION NEURAL NETWORK OPTIMIZED BY A GENETIC ALGORITHM AND RESPONSE SURFACE ANALYSIS CONSIDERING THE APPEARANCE OF AGGREGATES AND CURING CONDITIONS

Article

Reza Kashyzadeh Kazem, Amiri Nima, Ghorbani Siamak, Souri Kambiz

Buildings. Том 12. 2022. 438 с.

AN EXPERIMENTAL ANALYSIS TO DETERMINE THE LOAD-BEARING CAPACITY OF 3D PRINTED METALS

Article

Kogo Bridget, Xu Chao, Wang Bin, Chizari Mahmoud, Reza Kashyzadeh Kazem, Ghorbani Siamak

Materials. Том 12. 2022. 4333 с.

OPTIMIZATION OF THE STRUCTURE OF TURBINE BLADES PRODUCED BY METHODS OF ADDITIVE TECHNOLOGIES

Article

Eroshenko Vladislav O., Malkova Marianna Yu., Zadiranov Alexander N., Meshcheryakov Alexey V., Ghorbani Siamak

RUDN Journal of Engineering Researches. Том 4. 2022. 302–310 с.

SIMULTANEOUS EFFECTS OF CUTTING DEPTH AND TOOL OVERHANG ON THE VIBRATION BEHAVIOR OF CUTTING TOOL AND HIGH-CYCLE FATIGUE BEHAVIOR OF PRODUCT: EXPERIMENTAL RESEARCH ON THE TURNING MACHINE

Article

Allenov D.G., Deinova K.D., Ghorbani Siamak, Reza Kashyzadeh Kazem

International Journal of Advanced Manufacturing Technology. 2022.

A COMPREHENSIVE REVIEW ON MECHANICAL FAILURES CAUSE VIBRATION IN THE GAS TURBINE OF COMBINED CYCLE POWER PLANTS

Article

Watban Khalid Fahmi Al-Tekreeti, Reza Kashyzadeh Kazem, Ghorbani Siamak

Engineering Failure Analysis. Том 134. 2022. 106094 с.

NUMERICAL STUDY OF FREE VIBRATION BEHAVIOUR OF FILLED TOOL HOLDER USING EPOXY-GRANITE

Article

Kashyzadeh K.R., Ghorbani S.

Journal of Physics: Conference Series. Том 1687. 2020.

TAGUCHI APPROACH AND RESPONSE SURFACE ANALYSIS FOR DESIGN OF A HIGH-PERFORMANCE SINGLE-WALLED CARBON NANOTUBE BUNDLE INTERCONNECTS IN A FULL ADDER

Article

Ghorbani S., Ghorbani S., Kashyzadeh K.R.

INTERNATIONAL JOURNAL OF ENGINEERING. Том 33. 2020. С. 1598-1607

EFFECTS OF DRYING TEMPERATURE AND AGGREGATE SHAPE ON THE CONCRETE COMPRESSIVE STRENGTH: EXPERIMENTS AND DATA MINING TECHNIQUES

Article

Ghorbani S., Forouzanmehr M., Reza Kashyzadeh K.

International Journal of Engineering Transactions C: Aspects. Том 33. 2020. С. 1780-1791

THE EFFECT OF COMPOSITE BORING BARS ON VIBRATION IN MACHINING PROCESS

Article

Ghorbani S., Rogov V.A., Carluccio A., Belov P.S.

International Journal of Advanced Manufacturing Technology. Том 105. 2019. С. 1157-1174

WEAR ANALYSIS OF BEARINGS BY DIRECT SPECTRUM METHOD WHEN TRANSMITTING TORQUE MOTION FROM ELECTRIC MOTOR

Article

Allenov D.G., Pinaev R.A., Kravchenya V.I., Siamak G.

Научно-технический вестник Поволжья. 2019. С. 92-95

EXPERIMENTAL AND ANALYTICAL RESEARCH ON RELATIONSHIP BETWEEN TOOL LIFE AND VIBRATION IN CUTTING PROCESS

Article

Ghorbani S., Kopilov V.V., Polushin N.I., Rogov V.A.

Archives of Civil and Mechanical Engineering. Том 18. 2018. С. 844-862

EXPERIMENTAL AND THEORETICAL RESEARCH ON DRILLING EPOXY GRANITE USING COATED AND UNCOATED CARBIDE SPIRAL DRILL BITS

Article

Ghorbani S., Crisostomo A.V.A., Rogov V.A., Polushin N.I.

International Journal of Mechanical Sciences. Том 135. 2018. С. 240-252

IMPROVEMENT OF CUTTING TOOL PERFORMANCE DURING MACHINING PROCESS BY USING DIFFERENT SHIM

Article

Rogov V.A., Ghorbani S., Popikov A.N., Polushin N.I.

Archives of Civil and Mechanical Engineering. Том 17. 2017. С. 694-710

ПРИМЕНЕНИЕ МЕТОДА ТАГУТИ ДЛЯ ОПТИМИЗАЦИИ ВИБРАЦИИ И ШЕРОХОВАТОСТИ ОБРАБАТЫВАЕМОЙ ПОВЕРХНОСТИ ПРИ МЕХАНИЧЕСКОЙ ОБРАБОТКЕ

Article

Рогов В.А., Сиамак Горбани

Технология машиностроения. 2016. С. 11-21

INFLUENCE OF THE HANDLE DESIGN ON A COMPOSITE LATHE CUTTER

Article

Rogov V.A., Gorbani S.

Russian Engineering Research. Том 35. 2015. С. 57-60

RESEARCH ON SELECTING THE OPTIMAL DESIGN OF ANTIVIBRATIONAL LATHE TOOL USING COMPUTER SIMULATION

Article

Rogov V.A., Ghorbani S.

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Том 229. 2015. С. 162-167

ПОВЫШЕНИЕ КАЧЕСТВА ПОВЕРХНОСТИ ОБРАБАТЫВАЕМЫХ ДЕТАЛЕЙ ПРИ ТОЧЕНИИ РЕЗЦАМИ ЗА СЧЁТ УЛУЧШЕНИЯ ДЕМПФИРУЮЩИХ СВОЙСТВ ДЕРЖАВОК, ЗАПОЛНЕННЫХ КОМПОЗИЦИОННЫМ МАТЕРИАЛОМ

Dissertation

Горбани Сиамак

2015. 214 с.

ВЛИЯНИЕ КОНСТРУКЦИИ ДЕРЖАВКИ СБОРНОГО ТОКАРНОГО РЕЗЦА НА ЕГО ДЕМПФИРУЮЩУЮ СПОСОБНОСТЬ

Article

Рогов В.А., Горбани С.

СТИН. 2014. С. 14-18

VIBRATIONAL INVESTIGATION ON TOOLHOLDERS OF CUTTING TOOLS IN FINISH TURNING

Article

Рогов В.А., Горбани С.

RUDN Journal of Engineering Researches. 2014. С. 16-22

ВЫБОР РАЦИОНАЛЬНОЙ КОНСТРУКЦИИ ДЕРЖАВКИ СБОРНОГО ТОКАРНОГО РЕЗЦА СО ВСТАВКАМИ ИЗ КОМПОЗИЦИОННОГО МАТЕРИАЛА КОМПЬЮТЕРНЫМ МОДЕЛИРОВАНИЕМ

Article

Рогов В.А., Горбани С.

Вестник машиностроения. 2014. С. 81-82

INVESTIGATION OF THE MACHINING PARAMETERS FOR THE FINISH TURNING

Article

Rogov V.A., Ghorbani S.

Фундаментальные исследования. 2013. С. 435-440

INVESTIGATION OF DAMPING CAPACITY OF THE COMBINED LATHE TOOL USING COMPOSITE MATERIAL IN ITS STRUCTURE

Article

Rogov V.A., Ghorbani S.

Фундаментальные исследования. 2013. С. 1094-1099

Список записей

Другие авторы