Position sensitive gaseous photomultipliers

In this paper a simple design of a gaseous photomultiplier, sensitive up to visible light, is described. It consists of a parallel plate chamber combined with a solid photocathode through a capillary plate, which works in a transmission mode and serves to suppress photon feedback. Ion feedback was minimized through the optimization of the gas mixture. A gain >103 was achieved. © 2001 Elsevier Science B.V. All rights reserved.

Authors
Biteman V.1 , Guinji S.2 , Peskov V.3 , Sakurai H.2 , Silin E.4 , Sokolova T.5 , Radionov I.6
Journal
Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Number of issue
1-2
Language
English
Pages
205-208
Status
Published
Link
External link
DOI
10.1016/S0168-9002(01)00967-6
Volume
471
Year
2001
Organizations
  • 1 ADIT, TX, United States
  • 2 Yamagata University, Yamagata, Japan
  • 3 Department of Physics in Frescati, Royal Institute of Technology, KTH, 24 Frescativagen, 10405 Stockholm, Sweden
  • 4 Institute of Applied Mechanics, Russian Academy of Sciences, Moscow, Russian Federation
  • 5 Univ. for Frienship between Nations, Moscow, Russian Federation
  • 6 Reagent Inc., Moscow, Russian Federation
Keywords
Optimization; Photocathodes; Photons; Positrons; Parallel plate chamber; Solid photocathode; Transmisstion mode; Photomultipliers
Date of creation
19.10.2018
Date of change
19.10.2018
Short link
https://repository.rudn.ru/en/records/article/record/300/
Share

Other records