Kharun M.

EFFECT OF BASALT FIBERS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF MB MODIFIER BASED HIGH-STRENGTH CONCRETE

Article

Kharun M., Koroteev D.D.

JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES. INST MECHANICS CONTINUA & MATHEMATICAL SCIENCES. 2019. P. 70-77

INFLUENCE OF THICKNESS OF AIR GAP ON CONCRETE CURING IN FORMWORK WITH TRANSPARENT COVER

Article

Koroteev D.D., Kharun M.

Materials Science Forum. Trans Tech Publ, Uetikon-Zuerich, Switzerland. Vol. 972. 2019. P. 77-83

EDITORIAL PREFACE

Article

Vatin N.I., Galishnikova V.V., Pahl P.J., Kharun M.

IOP Conference Series: Materials Science and Engineering. Vol. 675. 2019.

EXPERIMENTAL STUDY OF TIMBER-STEEL ARCH WITH THE SUPPORT JOINTS ON GLUED-IN STEEL RODS

Article

Koroteev D.D., Boytemirov F.A., Kharun M.

JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES. INST MECHANICS CONTINUA & MATHEMATICAL SCIENCES. 2019. P. 306-314

AN EXPERIMENTAL EVALUATION OF SIZE EFFECT AND BEARING CAPACITY OF FOOTING ON NON-WOVEN GEOTEXTILE-REINFORCED SAND

Article

Shooshpasha I., Tavangar Y., Kharun M.

IOP Conference Series: Materials Science and Engineering. Institute of Physics Publishing. Vol. 675. 2019.

STRENGTH AND DEFORMABILITY OF REINFORCED CONCRETE BEAMS WITH INDIRECT REINFORCEMENT IN THE FORM OF WELDED MESHES IN COMPRESSED ZONE

Article

Tamrazyan A., Kharun M.

Materials Science Forum. Trans Tech Publ, Uetikon-Zuerich, Switzerland. Vol. 972. 2019. P. 134-140

HEAT TREATMENT OF SELF-COMPACTING HIGH-STRENGTH CONCRETE IN CAST IN SITU CONSTRUCTION USING INFRARED RAYS

Article

Kharun M., Koroteev D.D.

Materials Science Forum. Trans Tech Publ, Uetikon-Zuerich, Switzerland. Vol. 972. 2019. P. 84-90

NONLINEAR FINITE ELEMENT ANALYSIS OF STRESS-STRAIN STATE OF PLATE-ROD REINFORCED CONCRETE STRUCTURES UNDER THE ACTION OF BENDING AND TORSION

Article

Tamrazyan A.G., Kharun M.

IOP Conference Series: Materials Science and Engineering. Institute of Physics Publishing. Vol. 675. 2019.

TRANSLUCENT COVER DESIGN OF SOLAR ENERGY EQUIPMENT FOR MANUFACTURING OF PREFABRICATED CONCRETE COMPONENTS

Article

Koroteev D.D., Kharun M., Istrakova M., Romero Barrenechea M.E.

IOP Conference Series: Materials Science and Engineering. Institute of Physics Publishing. Vol. 675. 2019.

ASSESSMENT OF ECONOMIC ADVANTAGES OF SOLAR ENERGY FOR MANUFACTURING OF CONCRETE ELEMENTS

Article

Koroteev D.D., Kharun M., Suetina T.A.

JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES. INST MECHANICS CONTINUA & MATHEMATICAL SCIENCES. 2019. P. 155-164

SELECTED PEER-REVIEWED ARTICLES FROM 2ND ADVANCES IN SOCIAL SCIENCES RESEARCH INTERNATIONAL CONFERENCE (ASSRIC 2017), BANDUNG, INDONESIA, 5-6 MAY, 2017

Article

Maniam B., Jusoh M.S., Kharun M.

Advanced Science Letters. Vol. 24. 2018. P. 4761-4762

EFFECT OF BASALT FIBRES ON THE PARAMETERS OF FRACTURE MECHANICS OF MB MODIFIER BASED HIGH-STRENGTH CONCRETE

Article

Kharun M., Koroteev D.

MATEC Web of Conferences. EDP Sciences. Vol. 251. 2018.

PRETREATMENT OF DRINKING WATER FROM THE LOW POWER SURFACE WATER SOURCES

Article

Govorova Z.M., Svintsov A.P., Kharun M.

INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES. INST ADVANCED SCIENCE EXTENSION. Vol. 4. 2017. P. 133-137

FORECASTING THE COMPRESSIVE STRENGTH OF SOIL-CONCRETE DEPENDING ON THE PERCENTAGE OF CEMENT AND CURING PERIOD

Article

Kharun M., Svintsov A.P., Koroteev D.D.

JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES. UNIV EL OUED, FAC SCIENCE & TECHNOLOGY. 2017. P. 678-686

INFLUENCE OF THE DRY AND HOT CLIMATE CONDITIONS ON THE TECHNOLOGY OF CONCRETE WORKS

Article

Koroteev D.D., Kharun M., Stashevskaya N.A.

INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES. INST ADVANCED SCIENCE EXTENSION. Vol. 4. 2017. P. 5-9

EVALUATION OF END BEARING CAPACITY OF DRILLED SHAFTS IN SAND BY NUMERICAL AND SPT-BASED METHODS

Article

Shooshpasha I., Kharun M., Hasanzadeh A.

JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES. UNIV EL OUED, FAC SCIENCE & TECHNOLOGY. Vol. 9. 2017. P. 283-296

STRENGTH OF MODIFIED CONCRETES CURING WITHOUT CARE IN DRY AND HOT CLIMATE CONDITIONS

Article

Koroteev D.D., Kharun M., Galishnikova V.V., Stashevskaya N.A.

Key Engineering Materials. Vol. 753 KEM. 2017. P. 337-342

FORECASTING THE COMPRESSIVE STRENGTH OF SOIL-CONCRETEDEPENDING ON THE PERCENTAGE OF CEMENT AND CURING PERIOD

Article

Kharun M., Svintsov A.P., Koroteev D.D.

JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES. UNIV EL OUED, FAC SCIENCE & TECHNOLOGY. Vol. 9. 2017. P. 679-687

ORGANIZATIONAL AND ECONOMIC FEASIBILITY OF CONSTRUCTION PROJECTS THROUGH THE PERFECTION OF CONSTRUCTION SCHEDULING

Article

Stashevskaya N.A., Kharun M., Koroteev D.D., Kunitsyna M.L., Zharov A.N.

INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES. INST ADVANCED SCIENCE EXTENSION. Vol. 4. 2017. P. 20-25

MANUFACTURING OF CONCRETE ELEMENTS ON MOBILE POLYGONS WITH THE USING OF SOLAR ENERGY

Article

Koroteev D.D., Kharun M., Stashevskaya N.A.

INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES. INST ADVANCED SCIENCE EXTENSION. Vol. 4. 2017. P. 10-14

RELIABILITY OF TECHNOLOGICAL SYSTEMS OF BUILDING CONSTRUCTION IN PERMANENT EPS FORMWORK

Article

Kharun M., Svintsov A.P.

INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES. INST ADVANCED SCIENCE EXTENSION. Vol. 4. 2017. P. 94-98

EFFECT OF MODIFIER MB10-50C ON THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-STRENGTH FINE-AGGREGATE "POWDERY" CONCRETE

Article

Okolnikova G.E., Kharun M., Tiekolo D.

JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES. UNIV EL OUED, FAC SCIENCE & TECHNOLOGY. Vol. 9. 2017. P. 403-414

FORECASTING THE CONDITION OF PETROLEUM IMPREGNATED LOAD-BEARING CONCRETE AND REINFORCED CONCRETE STRUCTURES

Article

Kharun M., Svintsov A.P., Galishnikova V.V.

JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES. UNIV EL OUED, FAC SCIENCE & TECHNOLOGY. Vol. 9. 2017. P. 15-25

EFFECT OF MODIFIER MB10-01 ON THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-STRENGTH COARSE-AGGREGATE CONCRETE

Article

Okolnikova G.E., Kharun M., Tiekolo D.

JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES. UNIV EL OUED, FAC SCIENCE & TECHNOLOGY. Vol. 9. 2017. P. 392-402

THERMAL TREATMENT OF SELF-COMPACTING CONCRETE IN CAST-IN SITU CONSTRUCTION

Article

Kharun M., Nikolenko Y.V., Stashevskaya N.A., Koroteev D.D.

Key Engineering Materials. Vol. 753 KEM. 2017. P. 315-320

List of records

EFFECT OF BASALT FIBERS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF MB MODIFIER BASED HIGH-STRENGTH CONCRETE

INFLUENCE OF THICKNESS OF AIR GAP ON CONCRETE CURING IN FORMWORK WITH TRANSPARENT COVER

EDITORIAL PREFACE

EXPERIMENTAL STUDY OF TIMBER-STEEL ARCH WITH THE SUPPORT JOINTS ON GLUED-IN STEEL RODS

AN EXPERIMENTAL EVALUATION OF SIZE EFFECT AND BEARING CAPACITY OF FOOTING ON NON-WOVEN GEOTEXTILE-REINFORCED SAND

STRENGTH AND DEFORMABILITY OF REINFORCED CONCRETE BEAMS WITH INDIRECT REINFORCEMENT IN THE FORM OF WELDED MESHES IN COMPRESSED ZONE

HEAT TREATMENT OF SELF-COMPACTING HIGH-STRENGTH CONCRETE IN CAST IN SITU CONSTRUCTION USING INFRARED RAYS

NONLINEAR FINITE ELEMENT ANALYSIS OF STRESS-STRAIN STATE OF PLATE-ROD REINFORCED CONCRETE STRUCTURES UNDER THE ACTION OF BENDING AND TORSION

TRANSLUCENT COVER DESIGN OF SOLAR ENERGY EQUIPMENT FOR MANUFACTURING OF PREFABRICATED CONCRETE COMPONENTS

ASSESSMENT OF ECONOMIC ADVANTAGES OF SOLAR ENERGY FOR MANUFACTURING OF CONCRETE ELEMENTS

SELECTED PEER-REVIEWED ARTICLES FROM 2ND ADVANCES IN SOCIAL SCIENCES RESEARCH INTERNATIONAL CONFERENCE (ASSRIC 2017), BANDUNG, INDONESIA, 5-6 MAY, 2017

EFFECT OF BASALT FIBRES ON THE PARAMETERS OF FRACTURE MECHANICS OF MB MODIFIER BASED HIGH-STRENGTH CONCRETE

PRETREATMENT OF DRINKING WATER FROM THE LOW POWER SURFACE WATER SOURCES

FORECASTING THE COMPRESSIVE STRENGTH OF SOIL-CONCRETE DEPENDING ON THE PERCENTAGE OF CEMENT AND CURING PERIOD

INFLUENCE OF THE DRY AND HOT CLIMATE CONDITIONS ON THE TECHNOLOGY OF CONCRETE WORKS

EVALUATION OF END BEARING CAPACITY OF DRILLED SHAFTS IN SAND BY NUMERICAL AND SPT-BASED METHODS

STRENGTH OF MODIFIED CONCRETES CURING WITHOUT CARE IN DRY AND HOT CLIMATE CONDITIONS

FORECASTING THE COMPRESSIVE STRENGTH OF SOIL-CONCRETEDEPENDING ON THE PERCENTAGE OF CEMENT AND CURING PERIOD

ORGANIZATIONAL AND ECONOMIC FEASIBILITY OF CONSTRUCTION PROJECTS THROUGH THE PERFECTION OF CONSTRUCTION SCHEDULING

MANUFACTURING OF CONCRETE ELEMENTS ON MOBILE POLYGONS WITH THE USING OF SOLAR ENERGY

RELIABILITY OF TECHNOLOGICAL SYSTEMS OF BUILDING CONSTRUCTION IN PERMANENT EPS FORMWORK

EFFECT OF MODIFIER MB10-50C ON THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-STRENGTH FINE-AGGREGATE "POWDERY" CONCRETE

FORECASTING THE CONDITION OF PETROLEUM IMPREGNATED LOAD-BEARING CONCRETE AND REINFORCED CONCRETE STRUCTURES

EFFECT OF MODIFIER MB10-01 ON THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-STRENGTH COARSE-AGGREGATE CONCRETE

THERMAL TREATMENT OF SELF-COMPACTING CONCRETE IN CAST-IN SITU CONSTRUCTION

Other authors

Mukarzel S.A.

Mikhailova O.B.